offshore

Allied XL-2 42

Allied Boat Co. · 1969–1982 · Sloop rig

Allied XL-2 42 profile drawing
LOA41.5'
Beam11.5'
Draft8.33'
Displ.8.6t
Rigsloop
HullFiberglass

Bluewater Evidence · Ocean Proven

76% confidence

John Neal's Boats to Consider for Ocean Cruising rates the Allied 42 1 of 5: Functional, practical but truly ancient and likely not cost effective to refit.

Overview

The XL-2 42 is a Sparkman & Stephens design built by Allied Boat Co. in the United States from 1969 to 1982. It is a keel-centerboard masthead sloop, also offered as a yawl.

Design and Construction

Overall length is 41.5 ft on a 29.0 ft waterline, with 11.5 ft of beam. Displacement is 17,220 lb with 7,100 lb of lead ballast, a ballast ratio of about 41 percent. Draft is 8.33 ft with the board down and 4.17 ft with it up. The hull is a solid fiberglass laminate. The standard engine was a 40 hp Westerbeke diesel, and tankage is 30 gallons of fuel and 100 gallons of water. Reported sail area is 763 sq ft.

Buyers Notes

John Neal rates the Allied 42 1 of 5. His note is that it is functional and practical but truly ancient, and likely not cost effective to refit. Boats of this age need a full survey of the keel-centerboard hardware, rudder, rigging and tanks before purchase.

  1. [1]SpecificationsXL-2 42 (ALLIED) - SailboatData.com- Dimensions, displacement, ballast, sail area, keel, rig, designer and builder.
  2. [2]EditorialMahina Expeditions: Boats To Consider for Ocean Cruising (John Neal)- Rates the Allied 42 1 of 5.
See something wrong? Suggest a correction

Corrections need evidence: a link or citation we can check. Sourced suggestions get reviewed and credited in the entry's change notes if applied.

Owner knowledge counts: name the boat and year so we can attribute it.